CDA hg6120 Spécifications télécharger pdf (Page 12)

Gas Supply Requirements

IMPORTANT: THIS APPLIANCE SHOULD BE FITTED BY A GAS

SAFE REGISTERED FITTER OR OTHER SUITABLY QUALIFIED

PERSON.

• ThisinstallationmustcomplywiththeGasSafety(installationand

use) Regulations 1984.

•ThisapplianceiscategoryII2H3+andisdesignedforuseinthe

UK and Ireland. The installation must comply with the Gas Safety

(installation and use) Regulations 1984.

•TheCDAGroupLtdisnotlegallyabletoprovideanyassistancein

the installation of gas appliances except to Gas

Safe registered installers. Any Gas Safe registered ﬁtter requiring

help must provide their name, address and registration number.

Information supplied will be validated before help is provided.

•Intheeventthatthisapplianceisnotinstalledinaccordancewith

the above requirements, the appliance may be disconnected

from the mains gas supply until any faults are rectiﬁed; this is a legal

requirement.

•Thisapplianceshouldbeinstalledusing15mmcopperpipe

connected via an isolation valve in an adjacent unit. The isolation

valve needs to be accessible in an emergency or for service

purposes.

•Thisappliancemustnotbeconnectedtoacombustiongasrecovery

scavenging system

•Theconnectiontothegassupplymustcomplywithallcurrent

regulations in force.

•Wearenotlegallyabletooeradviceontheinstallationofgas

appliances to non Gas Safe registered personnel.

1 2 ... 7 8 9 10 11 12 13 14 15 16 17 18 19 20

Pas de commentaire

CDA hg6120 Spécifications Page 12