CDA HG3602 Manuel de service télécharger pdf (Page 21)

Regulating the Burner Minimum Setting

When changing from one type of gas to another, the minimum tap output must also be correct, considering

that in this position the ﬂame must be about 4 mm long and must remain lit even when the knob is turned

sharply from the maximum to the minimum position.

The adjustment is performed with the burner lit, as follows:

– Turn the knob to the minimum position.

– Remove the tap knob.

– Turn the screw A to the correct setting with a screwdriver (ﬁg. 25).

For LPG, tighten the adjustment screw completely.

Fig. 25

Lubrication of the Gas Taps

The operations must be executed by a qualiﬁed technician.

IMPORTANT: All intervention regarding installation maintenance and conversion of the

appliance must be fulﬁlled with original factory parts.

The manufacturer declines any liability resulting from the non-compliance of this obligation.

1 2 ... 16 17 18 19 20 21 22 23 24

Pas de commentaire

CDA HG3602 Manuel de service Page 21