CDA hn3620 Spécifications télécharger pdf (Page 11)

To turn the power o

To switch o a single zone, touch the “Selection” key for the zone no

longer required. Touch the “-” key until the zone display shows zero.

When both zones are at zero, the hob will switch o automatically

after approximately ten seconds.

Alternatively, to switch o the hob immediately, touch and hold the

key for approximately two seconds.

Timer

The hob is equipped with a timer that allows a ﬁnish time to be set for

the end of cooking on either or both zones, between a minimum of

one minute and a maximum of 99 minutes. This timer can be used

independently for dierent times on each zone.

To set the timer

• Switch on the power.

• Touch the “Zone selection” key for the zone required, then set the

power level by touching the “+” or “-” keys within ve seconds, as

above.

• Touch both the “+” and “-” keys at the same time to select the timer.

The timer display will show “00”.

• Set the required duration using the “+” or “-” keys within ve

seconds. Touching the “-” key will go straight to 30 minutes. Touch

and hold the timer “+” or “-” keys to scroll through the duration

quickly.

• After approximately ve seconds, the control LED stops ashing

and the countdown will start.

1 2 ... 6 7 8 9 10 11 12 13 14 15 16 ... 27 28

Pas de commentaire

CDA hn3620 Spécifications Page 11