CDA RC 9020 Manuel d'utilisateur télécharger pdf (Page 40)

Conversion to Natural Gas or to LPG

Injectors replacement of top burners

Every cooker is provided with a set of injectors for the various types of gas.

Injectors not supplied can be obtained from the After-Sales Service.

Select the injectors to be replaced according to the table at page 42.

The nozzle diameters, expressed in hundredths of a millimetre, are marked on the

body of each injector.

To replace the injectors proceed as follows:

– Remove the grids and extract the burner bodies.

– Using a wrench, substitute the nozzle injectors “J” (Fig. 38a - 38b) with those most

suitable for the kind of gas for which it is to be used (see “Table for the choice of the

injectors”).

The burners are conceived in such a way so as not to require the regulation

of the primary air.

Fig. 38a

Fig. 38b

1 2 ... 35 36 37 38 39 40 41 42 43 44 45 46 47 48

Pas de commentaire

CDA RC 9020 Manuel d'utilisateur Page 40