CDA RV921 Manuel d'utilisateur télécharger pdf (Page 32)

Gas Supply Requirements

IMPORTANT: THIS APPLIANCE SHOULD BE FITTED BY A GAS

SAFE REGISTERED FITTER OR OTHER SUITABLY QUALIFIED

PERSON.

• This installation must comply with the Gas Safety (installation and

use) Regulations 1984.

• This appliance is category II2H3+ and is designed for use in the

UK and Ireland. The installation must comply with the Gas Safety

(installation and use) Regulations 1984.

• The CDA Group Ltd is not legally able to provide any assistance

in the installation of gas appliances except to Gas Safe registered

installers. Any Gas Safe registered ﬁtter requiring help must provide

their name, address and registration number. Information supplied

will be validated before help is provided.

• This appliance is suitable for conversion to Liquid Petroleum Gas

(G30 Butane at a pressure of 28-30mbar or G31 Propane at a

pressure of 37mbar). A kit is provided. Do not attempt to ﬁt the

conversion kit yourself.

• This appliance is adjusted for natural gas (G20) at 20mbar only.

• In the event that this appliance is not installed in accordance with

the above requirements, the appliance may be disconnected from

the mains gas supply until any faults are rectiﬁed; this is a legal

requirement.

• This appliance must not be connected to a combustion gas

recovery scavenging system.

• The connection to the gas supply must comply with all current

regulations in force.

• We are not legally able to oer advice on the installation of gas

appliances to non Gas Safe registered personnel.

1 2 ... 27 28 29 30 31 32 33 34 35 36

Pas de commentaire

CDA RV921 Manuel d'utilisateur Page 32