CDA HCG 740 Users operating instructions Manuel d'utilisateur télécharger pdf (Page 44)

Adjusting amount of steam in Mixed and Regeneration Mode.

The oven is adjusted for an optimum amount of steam, but if for any reason

the user wants more, do the following:

1. Locate the energy regulator RE 1. this is regulated approximately to give

15 seconds of steam and 15 seconds without steam. Both in Mixed and

Regeneration.

2.Turn clockwise to increase amount of steam.

Regulating steam in: Regeneration and mixed mode

fig 49

fig 50 fig 51

Adjusting I K-type core probe thermostat K.(red case)

K-type thermocouple (Nickel-chrome/Nickel- aluminium) “Cr” probe

type parameter in PSE

-Simultaneously activate core probe selector (1) and SET (2), holding SET

down for approximately 4 seconds until “d1” appears on the display (3).(fig

53)

- With DOWN (5) move parameters until (3) “PSE” appears on display.

(fig 54)

- With “PSE” on display press SET again and hold down.

Position of

RE 2

Energy

Regulator

To obtain more steam, turn the

pin clockwise

RE1

1 2 ... 39 40 41 42 43 44 45 46 47 48 49 ... 56 57

Pas de commentaire

CDA HCG 740 Users operating instructions Manuel d'utilisateur Page 44